Description
The Victron SCC115060211 is a SmartSolar MPPT 150/60-TR solar charge controller that takes energy from solar panels and charges a battery. Its MPPT tracking keeps checking the panel voltage and current so that more of the available power is stored. Bluetooth is built in, and the VictronConnect app runs on iOS and Android.
Features
- Built-in Bluetooth for setting up, monitoring, updating and synchronizing the controller wirelessly.
- MPPT tracking: Victron says it improves energy harvest by up to 30% compared to PWM charge controllers.
- Partial shading: when two or more maximum power points appear, the controller locks to the optimum one.
- Maximum efficiency exceeds 98%, and there is no cooling fan.
- Eight preprogrammed charge algorithms, selectable with a rotary switch, plus a fully programmable algorithm.
- Load output is short-circuit proof and disconnects the load at a pre-set battery voltage.
- Over-temperature protection with power derating when hot, plus PV short-circuit and PV reverse polarity protection.
- Programmable relay that can trip on an alarm or other events, and remote on-off, for example to a VE.BUS BMS.
Specifications
| Manufacturer part number | SCC115060211 |
| Model | SmartSolar MPPT 150/60-TR |
| Weight | 6.61 lbs |
| Dimensions | 11 × 10 × 5 in |
| Maximum efficiency | Exceeds 98% |
| Cooling | No cooling fan |
| Bluetooth | Built-in |
| Charge algorithms | Eight preprogrammed, selectable with a rotary switch, plus a fully programmable algorithm |
| Load output | Short-circuit proof |
| Programmable relay | Can trip on an alarm or other events |
| Remote on-off | Yes, for example to a VE.BUS BMS |
| Data connection | VE.Direct |
| Temperature sensing | Internal temperature sensor, which compensates absorption and float charge voltage |
Connections
On the Victron SCC115060211, VE.Direct provides a wired data connection to a Color Control GX, other GX products, a PC or other devices. A Smart Battery Sense or a Victron BMV-712 Smart Battery Monitor is optional and can send battery voltage and temperature to one or more SmartSolar charge controllers over Bluetooth.
Some loads, especially inverters, are best connected directly to the battery, with the inverter remote control connected to the load output. A special interface cable may be needed; see the manual.
Battery life
Victron warns that when a solar charge controller cannot recharge a battery to its full capacity within one day, the battery is often cycled between a partially charged state and the end of discharge. This mode of operation, with no regular full recharge, will destroy a lead-acid battery within weeks or months.






