Description
The Victron Quattro 48/15000/200-100/100 277V is a 48V battery-based inverter/charger that gives 277/480V three-phase power when three units are set up as one set. It has two AC inputs with a built-in transfer switch, so no external transfer switch is needed. It suits sites that run 480V three-phase equipment and need battery backup.
Features
- Outputs 277 VAC per unit; three units form one 277/480V three-phase set
- 12kW continuous per unit (36kW per three-phase set) and 25kW surge per unit (75kW per three-phase set)
- Two AC inputs with integrated transfer switch; Victron lists a transfer to battery in under 20ms on the primary output
- Output 1 stays powered from grid, generator or battery; Output 2 is active only when an AC input is live
- PowerAssist supplements grid or generator power with battery power when load demand exceeds what they can deliver
- 200A charging per unit (600A per three-phase set), with adaptive profiles for LiFePO4, lead-acid, gel, AGM and custom batteries
- Each AC input has its own configurable current limit, so a standby generator smaller than the grid connection is not overloaded
- A Cerbo GX can manage and monitor a multi-unit system through the VRM portal
Specifications
| Model | Victron Quattro 48/15000/200-100/100 277V |
| Part number | QUA483150100 |
| AC output | 277 VAC ±2%, 60 Hz ±0.1% per unit; 277/480V in three-phase configuration |
| Continuous output | 15,000 VA / 12,000 W at 25 °C per unit (36kW per three-phase set) |
| Surge | 25kW per unit (75kW per three-phase set) |
| DC system voltage | 48V (range 38-66V) |
| Charger current | 200A per unit; 600A per three-phase set |
| Absorption / Float / Storage | 57.6 V / 55.2 V / 52.8 V |
| AC inputs | 2x 100A feed-through, integrated transfer switch |
| AC outputs | 2 |
| Transfer time | under 20ms on the primary output |
| Parallel operation | Up to 4 sets of 3 (12 units): 144kW continuous, 2,400A charging |
| Max efficiency | 96% |
| Enclosure | Aluminum, blue (RAL 5012) |
| Dimensions | 572 × 488 × 344 mm (22.6×19.2×13.6in) |
| Weight | 72 kg (160 lb) |
Compatibility
Additional three-phase sets are added through VE.Bus and set up with Victron’s System Configurator software. A Cerbo GX manages and monitors the whole multi-unit system, viewed through the VRM portal.











