Victron PSC481350095 Smart IP43 Charger 48/13(1) 120-240V

$461.95 USD

Victron PSC481350095 Smart IP43 Charger for 48 V batteries, with a 13 A nominal charge current in normal mode, 120-240V AC input, built-in Bluetooth and an IP43 aluminum enclosure.

Ships from manufacturer within 2 weeks

Description

The Victron PSC481350095 is a Smart IP43 Charger for 48 V batteries, with one charge output and a 120-240V AC input. Victron describes the charger as adaptive and intelligent, and the Smart IP43 range covers 12V, 24V, 36V and 48V systems. This listing is the 48V, 13 A version with a single output.

Features

  • One fully rated charge output with 13 A nominal charge current in normal mode and 6.5 A in low mode.
  • Adaptive, 6-stage charge algorithm, which Victron describes as fully programmable.
  • Built-in Bluetooth to monitor, configure and set alarms from a phone with the VictronConnect app.
  • VE.Direct connection to a GX device for full system integration and remote monitoring via the VRM Portal.
  • LiFePO₄ compatibility and VE.Smart Networking, as listed by Victron.
  • Programmable SPDT relay rated 5 A up to 250 VAC or 5 A up to 28 VDC.
  • Aluminum enclosure with an IP43 protection category.

Specifications

Part number PSC481350095
UPC 8719076070566
Nominal battery voltage 48 V
Charge Current Normal Mode (Nominal value) 13 A
Charge Current Low Mode 6.5 A
Charge algorithm Adaptive, 6-stage
Charge voltage absorption Normal 57.6V, High 58.8V, Lithium 56.8V
Charge voltage float Normal 55.2V, High 55.2V, Lithium N/A
Charge voltage storage Normal 52.8V, High 52.8V, Lithium 54V
Number of fully rated charge outputs 1
Maximum efficiency 94 %
AC input voltage range 85 to 250 VAC
AC input voltage bucket 120 V – 240 V
AC input frequency range 45 to 65 Hz
AC connection terminal type Inlet IEC 320 C14 with retainer clip
Battery connection terminal type Screw terminals 16 mm² (6 AWG)
Programmable relay SPDT – 5 A up to 250 VAC / 5 A up to 28 VDC
Output fully rated up to 40 °C
Operating temperature range -20 to 60 °C
Protection category IP43
Data communication VE.Direct, Bluetooth
Safety standards EN-IEC 60335-1, EN-IEC 60335-2-29
Width 249 mm
Depth 116 mm
Height 180 mm
Weight 2.7 kg
Material Aluminium
Colour Blue (RAL 5012)

Not included / sold separately

  • AC power cord: Victron says the AC cord is ordered separately; the unit has an IEC 320 C14 inlet.
  • Smart Battery Sense temperature sensor: listed by Victron as optional.

Compatibility

Victron lists LiFePO₄ compatibility for this charger. It can connect via VE.Direct to a GX device for system integration and remote monitoring through the VRM Portal.

Warranty

Victron lists a 5-year standard warranty and global repair service for the Smart IP43 Charger.