Description
Victron MultiPlus-II 48/10000/140-100 230V is an inverter charger with a 48 V nominal battery voltage, a 230 VAC output, a 10,000 VA continuous power rating at 25°C and a 140 A maximum battery charge current. Its steel enclosure is blue (RAL 5012) and rated IP22. The unit has one AC input, two AC outputs and a 100 A transfer switch.
Features
- Continuous inverter AC output of 8,000 W at 25°C, 7,000 W at 40°C and 6,000 W at 65°C, with 18,000 W peak power.
- Battery charger with a 140 A maximum charge current up to 25°C ambient and an adaptive, 4-stage charge algorithm.
- Adjustable charge voltages of 57.6 VDC absorption, 55.2 VDC float and 52.8 VDC storage.
- 100 A transfer switch, with a 187 to 265 VAC AC input voltage range and a 45 to 65 Hz AC input frequency range.
- VE.bus communication port with two RJ45 terminals and a remote terminal for On / Off / Charger only control.
- Programmable relay rated 230V / 4A AC, and DC 4A up to 35VDC or 1A up to 60VDC.
- Temperature sensor included.
- Protections: output short-circuit, overload, high and low battery voltage, over temperature, AC voltage on inverter output, excessive DC ripple.
Specifications
| Part number | PMP483105000 |
| UPC/EAN | 8719076044956 |
| Model | MultiPlus-II 48/10000/140-100 230V |
| Nominal battery voltage | 48 V |
| DC input voltage range | 38 to 66 VDC |
| Continuous power at 25°C (nonlinear load, crest factor 3:1) | 10,000 VA |
| Continuous inverter AC output power at 25°C / 40°C / 65°C | 8,000 W / 7,000 W / 6,000 W |
| Peak power rating | 18,000 W |
| Maximum charge current (up to 25°C ambient) | 140 A |
| Charge algorithm | Adaptive, 4-stage |
| Charge voltage absorption (adjustable) | 57.6 VDC |
| Charge voltage float (adjustable) | 55.2 VDC |
| Transfer switch AC current rating | 100 A |
| AC input voltage range | 187 to 265 VAC |
| AC input frequency range | 45 to 65 Hz |
| AC output voltage ±2% (adjustable) | 230 VAC |
| AC output frequency ±0.1% (adjustable) | 50 Hz |
| Maximum efficiency | 96 % |
| Zero load power | 38 W |
| Operating temperature range (fan assisted cooling) | -40 to 65 °C |
| Protection category | IP22 |
| Enclosure material | Steel |
| Colour | Blue (RAL 5012) |
| Dimensions (H x W x D) | 677 x 363 x 206 mm |
| Weight | 49 kg |
| Battery connection | M8 bolts (two for positive and two for negative connection) |
| AC connection | M6 bolts |
Standards
Victron lists these standards for the Victron MultiPlus-II 48/10000/140-100 230V: safety EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1 and EN-IEC 62109-2; emission and immunity EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, EN-IEC 61000-6-1, EN-IEC 61000-6-2 and EN-IEC 61000-6-3. For uninterruptible power supply and anti-islanding certificates, Victron refers buyers to its website.











