Description
The Victron MultiPlus-II 48/3000 – 35-50 – 120V is an inverter/charger that packs the MultiPlus and MultiGrid functions into one unit. It switches to inverter power to keep connected loads supplied when grid, shore or generator power fails or is disconnected. It can also ease a limited AC source such as a generator or shore connection, and it is rated 3000 VA continuous at 25°C.
Features
- Combines the MultiPlus and MultiGrid functions, with built-in anti-islanding.
- PowerAssist reduces battery charging when an AC source would be overloaded, then uses battery power to boost its output.
- Keeps connected loads supplied in less than 20 milliseconds after a grid, shore or generator power failure.
- Serves as a component of a Victron ESS system, combinable with MPPT Solar Chargers or Grid-tie PV Inverters.
- Remote monitoring and control with a GX device, such as the Cerbo GX, through the VRM app and VRM portal.
- Optional external AC current sensor, rated 100 A, for PowerControl, PowerAssist and self-consumption optimization.
- Has a programmable relay, a battery temperature sensor and a 32 A auxiliary output.
Specifications
| Model | MultiPlus-II 48/3000 – 35-50 – 120V |
| UPC | 8719076059226 |
| Continuous output power at 25°C | 3000 VA / 2400 W |
| Continuous output power at 40°C | 2200 W |
| Continuous output power at 65°C | 1700 W |
| Peak power | 5500 W |
| Maximum apparent feed-in power | 2500 VA |
| Output voltage and frequency | 120 VAC ± 2% / 60 Hz ± 0,1% |
| DC input voltage range | 38 – 66 V |
| Inverter input voltage | 48 VDC |
| Maximum efficiency | 95% |
| Zero load power | 11 W (7 W in AES mode, 2 W in Search mode) |
| Charger AC input voltage range | 90-140 VAC |
| Charger AC input frequency | 45 – 65 Hz |
| Maximum battery charge current | 35 A |
| Charge voltage absorption / float / storage | 57,6 V / 55,2 V / 52,8 V |
| Auxiliary output | Yes (32 A) |
| External AC current sensor (optional) | 100 A |
| Operating temperature range | -40 to +65°C (-40 – 150 °F), fan assisted cooling |
| Material and colour | Steel, blue RAL 5012 |
| Protection category | IP22 |
| Battery connection | M8 bolts |
| 120 V AC connection | Screw terminals 13 mm² (6 AWG) |
| Weight | 9 kg |
| Dimensions (h x w x d) | 536 x 275 x 147 mm |
System connections
Remote monitoring and control works when the MultiPlus-II is coupled with a GX device, for example the Cerbo GX. The VE.Bus port serves parallel, split phase and three phase setups, plus remote monitoring and system integration. In a Victron ESS system, the unit can be combined with MPPT Solar Chargers or Grid-tie PV Inverters.
Standards
Listed safety standards: EN-IEC 60335-1, EN-IEC 60335-2-29 and UL458. Listed emission and immunity standards: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2 and IEC 61000-6-3.
Victron briefly called this product the MultiGrid-II.








