Victron EasySolar-II 24/3000/70-32 MPPT 250/70 GX Inverter/Charger

$1,181.29 USD

Victron EasySolar-II 24/3000/70-32 MPPT 250/70 GX is a 24 V inverter/charger with a built-in solar charger. It gives 2,400 W continuous inverter output at 25°C, a 70 A maximum charge current and 2,000 W maximum PV power.

Ships from manufacturer within 2 weeks

SKU: PMP242307010 Categories: , Tags: , , , Brand:

Description

Victron EasySolar-II 24/3000/70-32 MPPT 250/70 GX is an inverter/charger with an MPPT solar charge controller and a control hub, all in one enclosure. Victron says it needs only a minimum of wiring to install. It is a 24 V model rated at 3,000 VA continuous output at 25°C with a nonlinear load.

Features

  • Puts the MPPT solar charger, inverter/charger and control hub into a single enclosure
  • Continuous inverter AC output of 2,400 W at 25°C, 2,200 W at 40°C and 1,700 W at 55°C
  • Peak power rating of 5,500 W
  • Maximum charge current of 70 A (up to 25°C ambient) with adaptive 4-stage charging
  • Maximum PV power of 2,000 W and maximum PV open circuit voltage of 250 V
  • Protections against output short-circuit, overload, high and low battery voltage, over temperature and excessive DC ripple
  • Battery connection with M8 bolts, PV connection with M6 bolts, AC connection with screw terminals 16 mm² (6 AWG)
  • Communication ports: VE.Direct, VE.Bus, VE.Can, BMS-Can, WiFi and Ethernet, with two RJ45 VE.Bus terminals

Specifications

Model EasySolar-II 24/3000/70-32 MPPT 250/70 GX
Part number (article code) PMP242307010
UPC/EAN 8719076049265
Nominal battery voltage 24 V
DC input voltage range 19 to 33 VDC
Continuous inverter AC output power at 25°C 2,400 W
Continuous inverter AC output power at 40°C 2,200 W
Continuous inverter AC output power at 55°C 1,700 W
Continuous power at 25°C (nonlinear load, crest factor 3:1) 3,000 VA
Peak power rating 5,500 W
AC output voltage ±2% (adjustable) 230 VAC
AC output frequency ±0.1% (adjustable) 50 Hz
AC input voltage range 187 to 265 VAC
Transfer switch AC current rating 32 A
Maximum charge current (up to 25°C ambient) 70 A
Charge algorithm Adaptive, 4-stage
Charge voltage absorption (adjustable) 28.8 VDC
Maximum PV power 2,000 W
Maximum PV open circuit voltage 250 V
Protection category IP21
Operating temperature range (fan assisted cooling) -20 to 45 °C
Dimensions (HxWxD) mm 499 x 268 x 237
Weight 26 kg
Material Aluminium
Colour Blue (RAL 5012)

What’s included

The temperature sensor is included.

Victron lists an External AC Current Sensor (100A) as optional.

Standards

Victron lists these safety standards for the Victron EasySolar-II 24/3000/70-32: EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1 and EN-IEC 62109-2.

It also lists these emission and immunity standards: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, EN-IEC 61000-6-1, EN-IEC 61000-6-2 and EN-IEC 61000-6-3.