Victron PIN122510510 Phoenix Inverter 12/250 120V GFCI

$93.06 USD

The Victron PIN122510510 Phoenix Inverter 12/250 converts battery power to 120 V AC, with a 250 VA continuous rating and a GFCI duplex outlet. It has a VE.Direct port for monitoring and configuration.

Ships from manufacturer within 2 weeks

SKU: PIN122510510 Categories: , Tags: , Brand:

Description

The Victron PIN122510510 Phoenix Inverter 12/250 is a 120 V AC inverter that lets you power household equipment from leisure or automotive batteries. It is rated 250 VA continuous, with a GFCI duplex outlet and a VE.Direct port for monitoring and configuration.

Features

  • 120 V AC output through a GFCI NEMA 5-15R duplex outlet.
  • Continuous power of 200 W at 25 °C and 175 W at 40 °C, with a 400 W peak.
  • Peak power helps start loads such as LED lamp converters, halogen lamps and electric tools.
  • VE.Direct port connects to a computer with a VE.Direct to USB interface cable, or to phones and tablets with a VE.Direct Bluetooth Smart dongle.
  • Monitors input and output voltage, % load and alarms.
  • Low battery alarm, cut-off and restart levels can be set, along with a dynamic load-dependent cut-off.
  • ECO mode puts the inverter on standby when the load falls below a preset value (min load: 15 W).
  • Short-circuit proof, and protected against overheating from overload or high ambient temperature.

Specifications

Part number PIN122510510
UPC 8719076050193
Continuous power at 25 °C 250 VA
Continuous power at 25 °C / 40 °C 200 / 175 W
Peak power 400 W
Output AC voltage 230VAC or 120VAC +/- 3% (adjustable)
Output frequency 50 Hz or 60 Hz +/- 0,1% (adjustable)
Output voltage range (configurable) 210 – 245 V
Outlet NEMA 5-15R, GFCI duplex (120 V)
Input voltage range 9,2 – 17 / 18,4 – 34,0 / 36,8 – 62,0 V
DC low shut down (adjustable) 9,3 / 18,6 / 37,2 V
DC low restart and alarm (adjustable) 10,9 / 21,8 / 43,6 V
Max. efficiency 87 / 88 / 88%
Zero-load power 4,2 / 5,2 / 7,9 W
Zero-load power in ECO mode (default retry interval 2,5 s, adjustable) 0,8 / 1,3 / 2,5 W
Operating temperature range -40 to +65 °C (fan-assisted cooling)
Protection category IP 21
Max. cable cross-section 10 mm² / AWG8
Battery connection Screw terminals
Enclosure Steel chassis and plastic cover (blue RAL 5012)
Dimensions (H x W x D) 86 x 165 x 260 mm (3.4 x 6.5 x 10.2 inch)
Weight 2,4 kg / 5,3 lbs
Remote on/off Yes
Safety standards EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458
Automotive directive ECE R10-4

Compatibility

For the Victron PIN122510510, Victron recommends the Filax Automatic Transfer Switch for its low-power inverters. The Filax has a switchover time of less than 20 milliseconds. A remote on/off switch connects to a two-pole connector, or between battery plus and the left-hand contact of that connector.