Description
The Victron Phoenix Inverter 12/1200 is a 120V AC inverter that powers household equipment from a 12V battery, such as a leisure or automotive battery. It has a GFCI duplex outlet, a VE.Direct communication port and a remote on/off connection. Its pure sine wave output is rated at 1200VA/960W continuous.
Features
- Pure sine wave output of 120VAC, fed from a 12V input.
- GFCI duplex outlet (NEMA 5-15R) on the 120V output.
- Surge rating of 2200W to start loads such as LED lamp converters, halogen lamps and electric tools.
- VE.Direct port connects to a computer (VE.Direct to USB interface cable needed) or to a smartphone or tablet (Bluetooth Smart dongle needed).
- Low battery alarm, cut-off and restart levels can be adjusted, and the cut-off can depend on load.
- ECO mode lets the inverter go to standby when the load drops below a preset value (min load: 15W).
- Remote on/off switch connects to a two-pole connector.
- Victron recommends the Filax Automatic Transfer Switch for its low-power inverters, with a switchover time of less than 20 milliseconds.
- Victron says it is short-circuit proof and protected against overheating from overload or high ambient temperature.
Specifications
| Product | Victron Phoenix Inverter 12/1200 – 120V – VE.Direct NEMA GFCI (UL 458) |
| Part number | PIN122122510 |
| UPC | 8719076054207 |
| Brand | Victron Energy |
| Continuous output | 1200VA/960W |
| Surge rating | 2200W |
| Input voltage | 12V |
| Output voltage | 120VAC |
| Output frequency | 50Hz or 60Hz (adjustable) |
| Waveform | Pure Sine Wave |
| Outlets | 120V: Nema 5-15R, GFCI |
| Remote on/off | Yes |
| Recommended transfer switch | Filax |
| DC connection type | Hardwire |
| Battery connection | Screw terminals |
| Maximum cable cross-section | 10mm² / AWG8 |
| Protection category | IP 21 |
| Operating temperature range | -40 to +65 degrees C (fan-assisted cooling) |
| Material and colour | Steel chassis and plastic cover (blue RAL 5012) |
| Weight | 2,4kg / 5.3 lbs |
| Dimensions (H x W x D) | 86 x 165 x 260 mm; 3.4 x 6.5 x 10.2 inch |
| Safety standards | EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458 |
“










