Description
The Victron Energy PIN121500500 is a 12/500 inverter that supplies 120V output through a Nema 5-15R socket. It monitors input and output voltage, % load and alarms, and its VE.Direct port connects to a computer or to phones and tablets. It has screw terminals for the DC connection, so no special tools are needed for installation.
Features
- Adjustable low battery voltage alarm trip and reset levels, plus low battery voltage cut-off and restart levels.
- Dynamic cut-off that depends on the load.
- Frequency of 50 Hz or 60 Hz.
- ECO mode can be switched on or off, with an adjustable sense level. The inverter goes to standby when the load drops below a preset value (min load: 15W).
- High start-up power for loads such as power converters for LED lamps, halogen lamps or electric tools.
- VE.Direct port works with a computer (VE.Direct to USB interface cable needed) or with phones and tablets (VE.Direct Bluetooth Smart dongle needed).
- Remote on/off switch connects to a two-pole connector, or between battery plus and the left-hand contact of that connector.
- Full bridge plus toroidal transformer design, which Victron says has proven its reliability over many years.
Specifications
| Part number | PIN121500500 |
| Brand | Victron Energy |
| Model | Inverter 12/500 |
| Output voltage | 120V |
| Output socket | Nema 5-15R |
| Frequency | 50 Hz or 60 Hz |
| ECO mode minimum load | 15W |
| Remote on/off connection | Two-pole connector |
| Communication port | VE.Direct |
| DC connection | Screw terminals |
| Monitoring | Input and output voltage, % load and alarms |
Protection
Victron says the inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
Load transfer to another AC source
For low power inverters, Victron recommends its Filax Automatic Transfer Switch for moving the load to another AC source.
Please contact your dealer for any returns, repairs or support issues related to this product.






