Victron Energy Orion-TR 12/12-30 DC to DC Charger, 30A Non-Isolated

$191.16 USD

Victron Energy Orion-TR 12/12-30 is a 12 V, 30A non-isolated DC to DC charger with Bluetooth for setup in the VictronConnect app. It charges lead acid and lithium batteries and can also run as a fixed-output power supply.

Ships from manufacturer within 2 weeks

SKU: ORI121236140 Category: Tags: , , Brand:

Description

The Victron Energy Orion-TR 12/12-30 is a non-isolated DC to DC charger with a 30A output, for systems where the two battery banks share a common negative (ground) connection. It can charge a battery or work as a power supply. Bluetooth lets you change its settings in the VictronConnect app.

Features

  • Isolates the starting battery from the service battery.
  • Three-stage charging profile in charge mode, for controlled charging of the battery.
  • Lead acid: short initial absorption time that lengthens automatically after deep discharge. Lithium: fixed absorption time, two hours by default, customizable in VictronConnect.
  • Engine running detection: can be set to charge only when the vehicle is running, and is compatible with smart alternators.
  • Power-supply mode gives a fixed output voltage regardless of applied load, while the input stays within the specified range.
  • Remote ON-OFF: a remote on/off switch or relay contact connects to a two-pole connector.
  • Short-circuit proof, and can be paralleled to increase output current.
  • IP43 rating: protected from water spray less than 60 degrees from vertical when installed with the screw terminals oriented downwards.

Specifications

Part number ORI121236140
Model Orion-TR 12/12-30
UPC 8719076048954
DC nominal input voltage 12 V
DC input voltage range 10-17 V
DC nominal output voltage 12 V
DC output voltage range 10-15 V
DC output current 30A
Standby current < 1mA
IP rating IP43
Dimensions (LxWxH) 7.3 x 5.1 x 3.2 in
Weight 3 lb
Manufacturer Victron Energy

Compatibility

The Orion-TR 12/12-30 is compatible with lead acid and lithium batteries. Its engine running detection is compatible with smart alternators (Euro 5 and Euro 6 engines).