Description
The Victron Lynx Smart BMS 1000A (M10) is a battery management system for Victron Lithium Battery Smart batteries, with a 1000A main safety contactor. It is built for high-current battery systems. Its 10mm terminals need matching M10 Lynx Distributors, and the part number is LYN034170210.
Features
- 1000A main safety contactor, which can also work as a remotely controllable main system switch.
- Integrated pre-charge circuit limits high inrush current when connecting compatible capacitive loads, such as inverter/chargers, in supported installations.
- Built-in battery monitor reports state of charge, voltage, current, historical data and operating status.
- Bluetooth for local monitoring and control through the VictronConnect app.
- ATC and ATD ports control compatible chargers and loads, and a programmable relay can run a pre-alarm mode.
- DVCC closed-loop control of compatible Victron inverter/chargers and MPPTs through a connected GX device.
- Monitors fuse status for up to four connected Lynx Distributor modules.
- Discharge floor sets the minimum SoC that limits how far the battery can discharge; requires VictronConnect v5.70 or later.
Specifications
| Manufacturer | Victron Energy |
| Product series | Lynx Smart BMS |
| Model | Lynx Smart BMS 1000A (M10) |
| Manufacturer part number | LYN034170210 |
| UPC | 8719076057604 |
| Product type | Battery Management System / Battery Monitor / Main Safety Contactor |
| Compatible battery family | Victron Lithium Battery Smart |
| Battery voltage range | 9–60V DC |
| Maximum input voltage | 75V DC |
| Supported system voltages | 12V, 24V, or 48V |
| Reverse polarity protection | No |
| Main safety contactor continuous rating | 1000A |
| Main safety contactor peak rating | 1200A for 5 Minutes |
| Power consumption, OFF mode | 0.3mA for All System Voltages |
| Terminals | 10mm |
| Weight | 5 lbs |
| Dimensions | 12 × 7 × 4 in |
Compatibility
The Victron Lynx Smart BMS 1000A is listed for the setups below.
- Victron Lithium Battery Smart batteries, up to 20 in one BMS system.
- 12V, 24V or 48V battery systems.
- Matching M10 Lynx Distributors, needed because the 1000A rating calls for a more robust terminal.
- Compatible Victron inverter/chargers and MPPTs, controlled through a connected GX device for DVCC.






