Description
The VDI-32 galvanic isolator from Victron Energy is a 32 A unit for reducing electrolytic corrosion on a boat. It blocks low-voltage direct current that would otherwise enter through the shore power grounding wire. That current can corrode underwater metal parts, such as the hull, propeller and shaft. The unit carries an IP67 protection rating and is installed directly behind the boat’s 230 V shore connection.
Features
- The VDI-32 galvanic isolator blocks low-voltage direct current from entering the boat through the shore power grounding wire.
- Two diodes connected in reverse parallel conduct only above a voltage threshold of approximately 1.4 V DC.
- Maximum current of 32 A, with a peak current of 3200 A / 20 ms.
- IP67 protection rating, with a potted, water-resistant design.
- Installs directly after the boat’s 230 V shore connection, in the green-yellow protective earth conductor.
- Needs at least 10 cm of free space and a vertical mounting position.
- If a higher fault voltage appears in the AC circuit, the diodes pass current and the residual current device interrupts it.
- Anodized aluminum heat sink.
Specifications
| Brand | Victron Energy |
| Model | VDI-32 |
| Part number | GDI000032000 |
| EAN | 8719076022381 |
| Maximum current | 32 A |
| Peak current | 3200 A / 20 ms |
| Shore power voltage | 230 V |
| Diode opening voltage | approximately 1.4 V DC |
| Protection | IP67 |
| Connection | M6 |
| Design | Water-resistant, potted |
| Heat sink material | Anodized aluminum |
| Installation | Directly after the boat’s 230 V shore connection, in the green-yellow protective earth conductor |
| Ventilation | At least 10 cm of free space |
| Mounting position | Vertical |
| Dimensions | 63 × 164 × 200 mm |
| Weight | 2 kg |
| Packed weight (Victron wholesale price list) | 2.5 kg |
| Packed size (Victron wholesale price list) | 7 x 26.5 x 17.5 cm |






