Description
The Victron BPR048100400 BatteryProtect 48V-100A is a battery protector that disconnects the battery from non-essential loads before it is completely discharged, which would damage the battery, or before too little power is left to crank the engine. It is a uni-directional device, so current flows only from the Battery terminal to the Load terminal.
Features
- Disconnects non-essential loads before the battery is completely discharged
- Also disconnects before the battery has insufficient power left to crank the engine
- Handles current in one direction only: to a load or from a charger, never both at the same time
- Load disconnect delay is 90 s, or immediate when triggered by the VE.Bus BMS
- Output short-circuit protection
- Battery and load terminals use M8 bolts; alarm and remote connections use screw terminals
Specifications
| Part number | BPR048100400 |
| UPC | 8719076021469 |
| Battery voltage nominal | 48V |
| Operating voltage range | 24 V to 64 V |
| Maximum continuous load current rating up to 40°C | 100 A |
| Maximum continuous load current rating up to 60°C | 60 A |
| Peak current rating (30 seconds) | 250 A |
| Default threshold engage | 48 |
| Default threshold disengage | 42 |
| Load disconnect delay (immediate if triggered by the VE.Bus BMS) | 90 s |
| Load reconnect delay | 30 s |
| Alarm output delay | 12 s |
| Maximum load on alarm output | 50 mA |
| Current consumption when on | 2 mA |
| Current consumption when off or in low voltage protection mode | 1.5 mA |
| Operating temperature range | -40 to 50 °C |
| Able to deal with reverse current | No |
| Battery and load terminals | M8 bolts |
| Remote terminal | Screw terminal, two pole |
| Alarm terminal | Screw terminal, 3-pole |
| Protection category: electronic components / connection area | IP67 / IP00 |
| Width | 123 mm |
| Height | 62 mm |
| Depth | 120 mm |
| Weight | 0.8 kg |
Warranty
Victron lists a 5-year standard warranty and global repair service for the Victron BPR048100400.






