Description
The Victron BPC121715106 is a BlueSmart IP67 charger with 17AMP output for 12 VDC batteries, taking a 120v input. It is Bluetooth Smart enabled, so voltage and current can be monitored wirelessly and settings changed from a phone.
Features
- Bluetooth Smart enabled: monitor voltage and current, change settings and update the charger when new features arrive.
- Encapsulated unit that Victron describes as waterproof, shockproof and ignition protected, with a cast aluminium casing and resin-moulded electronics.
- Victron lists 92% efficiency or better, with power draw under a Watt once the battery is fully charged.
- Adaptive 5-stage charge cycle: bulk, absorption, recondition, float and storage, adjusted to how the battery is used.
- Storage mode starts after 24 hours without discharge, lowering float voltage to 2,2 V/cell (13,2 V for a 12 V battery).
- Also charges Li-ion (LiFePO4) batteries, using a bulk, absorption and float sequence.
- Protected against overheating: output current drops as temperature rises up to 60°C, but the charger will not fail.
- Two status LEDs: yellow for charge stage (fast or slow blink, solid for float, off in storage) and green for power on.
Specifications
| Part number | BPC121715106 |
| UPC | 8719076044840 |
| Brand | Victron Energy |
| Charger output current | 17 A (17AMP) |
| Charger output voltage | 12 V |
| Charger input voltage | 120v |
| Charging banks | 1 |
| Portable | Yes |
| Weight | 5.21 lbs |
| Box dimensions | 3″H x 7″W x 10″L |
Warnings
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.










