Description
The Blue Smart IP65 Charger 12/15(1) is an intelligent battery charger from Victron, with a 15 A nominal charge current in normal mode, for RVs, classic cars, boats, motorcycles and similar applications. This 120 V version has a 120 V AC input and is listed at 95% efficiency.
Features
- 15 A nominal charge current in normal mode, and 4 A in low mode for smaller batteries.
- Adaptive 7-stage charge algorithm with 8 pre-programmed profiles for lithium, lead-acid, AGM, gel and flooded batteries, or a custom profile.
- Dedicated Li-ion setting, plus a reconditioning mode for lead-acid batteries left partly charged or idle.
- Storage mode adjusts charge levels once the battery reaches 100%, for seasonal storage.
- Power supply mode lets it act as a DC power supply, selected in the VictronConnect app.
- Victron says it can revive fully discharged batteries, even from 0 volts.
- IP65 water, dust and chemical resistance, plus protection against overtemperature, short-circuit and reverse polarity.
- Bluetooth connection to the VictronConnect app for Android or iOS, to adjust profiles and track status.
Specifications
| Part number | BPC121531104R |
| UPC/EAN | 8719076043201 |
| Nominal battery voltage | 12 V |
| Charge current normal mode (nominal value) | 15 A |
| Charge current low mode | 4 A |
| Efficiency | 95 % |
| Charge algorithm | Adaptive, 7-stage |
| Charge voltage absorption | Normal 14.4 V, High 14.7 V, Lithium 14.2 V |
| Charge voltage float | Normal 13.8 V, High 13.8 V, Li-ion 13.5 V |
| Charge voltage storage | Normal 13.2 V, High 13.2 V, Li-ion 13.5 V |
| Temperature compensation (adjustable) | -16 mV/°C |
| AC input voltage range | 10 to 130 VAC |
| AC input voltage bucket | 120 V |
| AC input frequency range | 45 to 65 Hz |
| AC connection | Cable of 1.8 meter (6 feet) with US NEMA 5-15 plug |
| Battery connection | Red and black 1.5 meter cable with plugable M8 eyelets or clamps |
| Protection category | IP65 |
| Protections | Battery reverse polarity, output short-circuit, over temperature |
| Operating temperature range | -40 to 60 °C |
| Output fully rated up to | 30 °C |
| Standby power consumption | 0.5 W |
| Dimensions (width, height, depth) | 105 mm, 60 mm, 190 mm |
| Weight | 0.9 kg |
| Safety standards listed | CSA C22.2, EN-IEC 60335-1, EN-IEC 60335-2-29, UL 1236 |
Compatibility
Victron’s page says it works with VictronConnect. The page also lists these accessories under Complete the system: M6/M8 eyelet connector, clamp connector, MagCode Power Clip, 2 meter extension cable, 12V cigarette lighter plug and a carry case.
Warranty
Victron’s page lists a 5-year standard warranty and a global repair service.







