Description
The Victron Energy BPC120731104R is a BlueSmart IP65 battery charger for 12 VDC batteries, with built-in Bluetooth. Victron describes it as a professional charger for workshop devices and motor vehicles, including boats, cars, motorbikes and camper-vans. It delivers 7A in normal mode from a 120 VAC input.
Features
- Built-in Bluetooth lets you set up and configure the charger and read its voltage and current.
- Seven-step smart charge algorithm.
- Li-ion battery mode, plus a low power mode for charging smaller batteries.
- Attempts to recharge a fully discharged battery at low current, then resumes normal charging once voltage builds up.
- Reverse polarity, output short circuit and over temperature protection.
- No cooling fan or other moving parts, so Victron says the charger is totally silent.
- Protection against ingress of dust, water and chemicals.
- Output current eases back as temperature rises to 60°C, but Victron says the charger will not fail.
Specifications
| Part number | BPC120731104R |
| Battery voltage | 12 VDC |
| Charge current, normal mode | 7A |
| Charge current, LOW | 2A |
| Input voltage range and frequency | 120 VAC |
| Efficiency | 94% |
| No load power consumption | 0.5W |
| Charge voltage ‘absorption’ | Normal: 14,4V High: 14,7V Li-ion: 14,2V |
| Charge voltage ‘float’ | Normal: 13,8V High: 13,8V Li-ion: 13,5V |
| Charge voltage ‘storage’ | Normal: 13,2V High: 13,2V Li-ion: 13,5V |
| Temperature compensation (lead-acid batteries only) | 16 mV/°C (9mV/°F) |
| Back current drain | 0.7Ah/month (1mA) |
| Operating temp. range | -40 to +60°C (full rated output up to 30°C) -40 to +140°F (full rated output up to 90°F) |
| Humidity (non condensing) | Max 95% |
| Can be used as power supply | Yes |
| Protection | Reverse polarity, output short circuit, over temperature |
What’s included
Victron lists the following with the Victron Energy BPC120731104R:
- BlueSmart IP65 battery charger
- Installation hardware
- Owner’s manual






