Description
The Victron BPC120715106 is a 12 VDC, 7 A battery charger in the BlueSmart IP67 range, built for a 100-135 VAC input. Its casing is cast aluminum and its electronics are moulded in resin, so the unit is fully encapsulated. Bluetooth lets you monitor voltage and current, change settings and update the charger as new features arrive.
Features
- Charges at 7 A in normal mode and at 2 A in low mode.
- Five-stage adaptive charge algorithm: bulk, absorption, recondition, float and storage.
- Storage mode starts when the battery has had no discharge for 24 hours, lowering float voltage to limit gassing and corrosion.
- Once a week the voltage rises to the absorption level to equalize the battery.
- Starts charging a battery that has discharged to zero volts.
- Lithium-ion batteries are charged with a simple bulk, absorption and float algorithm.
- Output current drops by 3% per °C above 40 °C, up to 60 °C, and the charger will not fail.
- Protection against reverse battery polarity (fuse), output short circuit and over-temperature.
- Two status LEDs: yellow for the charge stage and green for power on.
Specifications
| Model | Victron BPC120715106 |
| Product | BlueSmart IP67 Charger |
| Output voltage | 12 VDC |
| Output current, normal mode | 7 A |
| Output current, low mode | 2 A |
| Input voltage range | 100-135 VAC |
| Efficiency | 93% |
| No-load power draw | 0.5 W |
| Charge algorithm | 5-stage adaptive |
| Operating temperature | -30 °C / -22 °F to +60 °C / 140 °F (full rated output up to 40 °C / 100 °F) |
| Humidity | Up to 100% |
| Protection | Reverse battery polarity (fuse), output short circuit, over-temperature |
| Can be used as a power supply | Yes |
| Part number | BPC120715106 |
What’s included
- BlueSmart IP67 battery charger
- Installation hardware
- Owner’s manual






