Description
The Argofet 200-2 battery isolator from Victron Energy is a 200A unit for two battery banks, part number ARG200201020. It uses FET technology instead of diodes, and it detects whether the system runs at 12V or 24V on its own. Victron Energy says it has virtually no voltage loss.
Features
- FET (field effect transistor) technology instead of a diode design
- Voltage loss of less than 0.02V at low current and an average 0.1V at high current
- Charges multiple batteries at the same time
- Auto-ranging detection for 12V or 24V systems
- Current-limited energize input for B+ control
- Available with 2 or 3 battery outputs and in 100A or 200A ratings
- Engine start/stop switch integration
- Compact design with panel or bulkhead mounting
Specifications
| Part number | ARG200201020 |
| Model | Argofet 200-2 |
| Current rating | 200A |
| Battery outputs | 2 |
| Technology | FET (Field Effect Transistor) |
| Voltage loss | Less than 0.02V (low current), avg 0.1V (high current) |
| System voltage | Auto-ranging 12V/24V |
| Input type | Single alternator or charger output |
| Energize input | Current-limited B+ control |
| Protection | Integrated thermal shutdown |
| Mounting | Panel or bulkhead mount |
| Dimensions | 65 x 120 x 200 mm (2.6 x 4.7 x 7.9 inches) |
| Weight | 1.4 lbs |
What’s included
- Argo FET isolator unit
- Installation hardware and brackets
- Connection terminals and cables
- User manual and technical documentation
- Wiring diagrams
Compatibility
The Argofet 200-2 battery isolator is listed as alternator or charger compatible, with a single alternator or charger output as its input type.






