Description
The Dickinson 20-000 fuel pump is a low pressure 12V impulse pump built on a Walbro FRD-2 unit. Dickinson says it runs continuously at 2-3.5 psi and is best for runs approx. under 6ft. Dickinson also says that, in its experience, the pump works better pulling fuel than pushing it to a heater or stove.
Features
- Low pressure 12V impulse pump built on a Walbro FRD-2 unit
- Runs continuously at 2-3.5 psi
- Dickinson says it works better pulling fuel than pushing fuel to a heater or stove
- Best for runs approx. under 6ft
- 3/8” flare fittings included
Specifications
| Part number | 20-000 |
| UPC | 814901011245 |
| Brand | Dickinson Marine |
| Voltage | 12V |
| Pump type | Low pressure impulse pump |
| Pump model | FRD-2 Walbro |
| Operating pressure | 2-3.5 psi, runs continuously |
| Run length | Best for runs approx. under 6ft |
| Stove and heater input pressure | 3 psi (Dickinson’s figure for its stoves and heaters) |
| Fittings | 3/8” flare fittings |
What’s included
- 3/8” flare fittings






