Dickinson 00-PAC Pacific Diesel Stove, 304 Stainless Steel

$2,016.18 USD

Dickinson 00-PAC Pacific Diesel Stove is a diesel-burning stove with a laser-cut 304 stainless steel design and a cast iron cooktop. It needs 5” diameter chimney parts and a permanent fresh air vent in its area.

Ships from manufacturer within 2 weeks

SKU: 00-PAC Category: Tags: , , , Brand:

Description

The Dickinson 00-PAC Pacific Diesel Stove is a diesel-burning stove with a cast iron cooktop for cooking. It is sized to fit most standard stove cutouts and burns diesel, giving dry heat. It is factory set for #2 diesel, with valves for kerosene and #1 diesel available.

Features

  • Pacific Diesel Stove fits most standard stove cutouts.
  • Dickinson says it burns diesel economically.
  • Produces dry heat, which Dickinson says removes moisture from the vessel.
  • Cast iron cooktop for cooking, and a laser-cut design in 304 stainless steel.
  • Includes a 12v fan for start-up and draft assistance; Dickinson says it can be converted to 24v if requested when ordering.
  • Factory set for #2 diesel; valves for kerosene and #1 diesel are available.
  • Hot water coil option: a 1-turn coil can heat 5-10 gallons of water, or a 2-turn coil 15-20 gallons.

Specifications

Part number 00-PAC
UPC 814901011450
Brand Dickinson Marine
Fuel Diesel, factory set for #2 diesel
Width 21.75”
Height 23.50”
Depth 21.50”
Weight 126 lbs.
Oven width 10.25”
Oven depth 13”
Oven height 10.5”
Fuel consumption (24hr), low 1.30 gal
Fuel consumption (24hr), high 3.20 gal
Heat output, low 6500 BTU
Heat output, high 16250 BTU
Chimney diameter 5” diameter
Chimney length Minimum 4ft, maximum 8ft
Draft assist fan 12v
Cooktop Cast iron
Material 304 stainless steel (laser-cut design)

What’s included

The stove includes a 12v fan for start-up and draft assistance.

Not included / sold separately: the hot water coil. The page lists the one-turn and two-turn coils as separate options with their own part numbers (00-PAC-12-1T and 00-PAC-12-2T).

Installation requirements

  • Fits most standard stove cutouts.
  • Requires 5” diameter chimney parts.
  • Needs a minimum 4ft, maximum 8ft of chimney; a straight run with no elbows is best.
  • For chimneys 6ft or longer, a barometric damper is highly recommended.
  • Requires a permanent fresh air vent in the unit’s area.
  • Sailboat installation: must face fore or aft. If port or starboard facing is desired, valve adjustment may be needed.

Follow the installation guidelines for optimal performance.