Dickinson Diesel Stove and Floormount Heater

Price range: $897.15 USD through $2,961.58 USD

Dickinson Diesel Stove and Floormount Heater from Dickinson Marine, a diesel-burning unit offered in four options. The Atlantic stove has a cast iron cooktop and a 12v draft assist fan for start-up.

Description

The Dickinson Diesel Stove and Floormount Heater is a diesel-burning unit from Dickinson Marine, offered in four options: the Atlantic and Adriatic stoves, and the Antarctic and Alaska floormount heaters. Pick the option you want from the menu on this page. Dickinson’s Atlantic page describes its dry heat as comfortable, with a cast iron cooktop for cooking.

Features

  • Atlantic: Dickinson’s largest stove, with a larger diesel burner than its other stoves.
  • Atlantic: cast iron cooktop for cooking.
  • Atlantic: laser-cut design in 304 stainless steel.
  • Atlantic: produces dry heat to eliminate moisture inside the vessel.
  • Atlantic: includes a 12v fan for start-up and draft assistance.
  • Atlantic: valve is factory set for #2 diesel; valves for kerosene and #1 diesel are also available.
  • Atlantic hot water options: a 1-turn coil heats 5-10 gallons of water; a 2-turn coil heats 15-20 gallons.
  • Sailboat installation: must face fore or aft; for port or starboard facing, mount the valve on the side.

Specifications

The figures below are for the Atlantic (00-ATL), the only option Dickinson’s page covers.

Options Atlantic Diesel Stove (00-ATL), Adriatic Diesel Stove (00-ADR), Antarctic Diesel Floormount Heater (00-ANT), Alaska Diesel Floormount Heater (00-ALA)
Part number (Atlantic) 00-ATL
UPC (Atlantic) 814901011474
Material 304 stainless steel
Width 30.50″
Height 28.75″
Depth 23″
Weight 189 lbs.
Oven width 16”
Oven depth 14.5”
Oven height 12”
Heat output Low: 8125 BTU; High: 24375 BTU
Fuel consumption (24hr) Low: 1.89 gal; High: 4.50 gal
Fuel valve Factory set for #2 diesel; kerosene and #1 diesel valves also available
Draft assist fan 12v
Chimney parts 5” diameter
Chimney length Ideal 6ft with no elbows; minimum 4ft, maximum 8ft
Fresh air Permanent fresh air vent in the unit’s area required
Hot water coil 1-turn: 5-10 gallons; 2-turn: 15-20 gallons

Installation

For the Atlantic, Dickinson requires 5” diameter chimney parts and a permanent fresh air vent in the unit’s area. Ideal chimney length is 6ft with no elbows, with a minimum of 4ft and a maximum of 8ft. For chimneys 6ft or longer, a barometric damper is highly recommended.

Dickinson’s page says the Atlantic must be shipped on a pallet and that the installation guidelines should be followed for optimal performance. The page also links a diesel cookstove installation and operating manual and an Atlantic information sheet.

Additional information

Option

Alaska Floormount Heater, Antarctic Floormount Heater, Adriatic Stove, Atlantic Stove