Description
The Navico NAC-1 autopilot computer sits at the heart of the system, housing the electronics that run it and link it to the other parts. It is built for hydraulic or cable-steered boats up to 9 metres (30 feet) in length and works with Simrad displays for a fully integrated autopilot.
Features
- Reliable autopilot performance based on Continuum Steering technology.
- Recommended for boats up to 9 metres (30 feet) in length.
- Drives either the Simrad PUMP-1 reversible hydraulic pump or the HELM-1 drive unit for cable-steered vessels.
- Virtual Rudder Feedback removes the need for a separate rudder feedback unit on outboard and sterndrive boats with planing hulls.
- Supports Simrad RF25 rudder feedback units.
- Plug-and-play connectors minimise the wiring needed to install the autopilot system.
- NMEA 2000 connectivity to heading sensors, rudder feedback units and multifunction displays anywhere on board.
Specifications
| Part number | 000-11769-001 |
| UPC | 9420024134757 |
| Supply voltage | 9-16VDC |
| Recommended fuse rating | 20A |
| Power consumption max | 140mA + Drive unit load |
| Power consumption typical | 140mA + Drive unit load |
| Drive output | 12VDC, Rev. Motor control 8A, 16A peak (1sec.) |
| Engine drive systems integration | Reversible pump/Helm Drive |
| Rudder sensor support | VRF, 0-5V, RF25 |
| Compass sensor support | NMEA2000 |
| NMEA 2000 connectivity | 1x CAN Micro-C port, 3 LEN |
| Protection rating | IPx5 |
| Operating temperature range | -25C to +55C (-13F to +131F) |
| Storage temperature range | -30C to +70C (-22F to +158F) |
| Mounting type | Bulkhead |
| Dimensions W x H x D | 204 x 190 x 57mm (8.03 x 7.5 x 2.24″) |
| Weight | 0.6kg (1.3 lbs) |
| Compass safe distance | 0.5m (19.7″) |
| Warranty period | 2 years |
What’s included
- NAC-1/NAC-2 Power Cable – 2m
Compatibility
- Compatible with the Simrad PUMP-1 reversible hydraulic pump and HELM-1 cable steer drive unit.
- Supports Simrad RF25 rudder feedback units.
- Works with Simrad displays.






