Description
The Pelican 1595 Air Case is a mid-size travel case for gear that needs more room than a carry-on case. Its body is a proprietary polypropylene blend, the case is up to 40% lighter than an average polymer case, and it comes with a polyurethane foam insert. In size, it sits between the 1535 Air carry-on case and the 1615 Air check-in case.
Features
- IP67 & MIL-SPEC certified, with waterproof, crushproof and dustproof protection
- Proprietary HPX² polymer body, up to 40% lighter than an average polymer case
- Press and Pull™ latches stay shut under pressure and open when you need them
- Automatic pressure equalization valve balances interior pressure and keeps water out
- Waterproof O-ring seal and fold-down over-molded handle
- Retractable extension trolley handle with quiet stainless-steel bearing wheels
- Business card holder and stainless steel padlock protectors
- Mid-size airline check-in case; check with your airline for exact measurement requirements
Specifications
| Part number | 015950-0000-150 |
| UPC | 019428185589 |
| Colour | Orange |
| Interior volume | 1.97ft³ (0.06m³) |
| Exterior dimensions | 28.52 x 17.89 x 10.73″ (72.44 x 45.44 x 27.25 cm) |
| Interior dimensions | 25.53 x 14.92 x 8.92″ (64.85 x 37.9 x 22.66 cm) |
| Lid depth | 2.00″ (5.08 cm) |
| Bottom depth | 6.92″ (17.58 cm) |
| Total depth | 8.92″ (22.66 cm) |
| Weight with foam | 16.35 lbs (7.42 kg) |
| Weight no foam | 13.60 lbs (6.17 kg) |
| Buoyancy | 148.37 lbs (67.3 kg) |
| Padlock hole diameter | 5/16″ |
| Body material | Proprietary Polypropylene Blend |
| Foam material | Polyurethane |
| Latch material | ABS |
| O-ring material | EPDM |
| Pins material | Stainless Steel |
| Purge body material | ABS |
| Purge O-ring material | 70 Shore Nitrile |
| Purge vent material | Hi-Flow Gore-Tex 3 Micron Hydrophobic Non-Woven |
| Maximum temperature | 140°F (60°C) |
| Minimum temperature | 0°F (-18°C) |
Warranty and Certificates
The 1595 Air Case carries a Limited Lifetime Warranty (where applicable by law). Signed Certificates of Test Compliance cover dry heat, vibrations, low temperature, dust, vertical impact and water immersion. Made in USA.







