Description
The em-trak B200 is a high transmit power (5W) priority AIS Class B transceiver specifically designed for serious ocean sailors, offering enhanced safety through maximum range and transmission priority.
The high powered, advanced AIS engine provides reliability you can depend on and the very best AIS performance in its class. Completely water and weatherproof (IPx6 & IPx7 certified), and ruggedized to withstand shock and vibration, the B200 has been extensively tested in the most extreme marine environments and will provide years of maintenance free operation. The dual NMEA2000 & 0183, coupled with serial ports, USB, WiFi, and Bluetooth also make connecting to all your tablets, PC’s, display and navigation devices easy and simple.
Peace of mind is further enhanced with an internal battery that ensures continuous operation for up 120 hours in the event of total power loss. The B200 also supports silent mode, where transmissions are switched off, but receiving continues, and can be enabled through the integrated switch.
- Certified AIS Class B – 5W SOTDMA
- Ruggedized and impervious to extreme environments – water (IPx6, IPx7), damp, shock, vibration, temperatures
- High Performance latest generation GPS
- Internal battery back-up for up to 120hrs operation – charge is automatically maintained by primary vessel power and automatically switches to battery if lost
- WiFi & Bluetooth wireless connectivity
- NMEA0183 & NMEA2000
- Low power consumption
- Anti-tamper protection
- Enhanced RF screening to protect against electromagnetic interference
- Built-in power surge protection
PHYSICAL AND ENVIRONMENTAL SPECIFICATION
Size (w x h x d) – 170 x 140 x 69mm
Weight – 695g
Operating temperature – -25°C to +55°C
Storage temperature – -25°C to +70°C
Ingress protection – IPx6 and IPx7
ELECTRICAL SPECIFICATION
Supply voltage – 12V or 24V DC
Supply voltage range – 9.6V – 31.2V DC
Average current (at 12V) – 240mA (1.6A when battery charging)
Peak current – 3.85A
Average power consumption (at 12V) – 2.9W (19.2W when battery charging)
Galvanic isolation – NMEA 0183 inputs only, NMEA 2000, VHF antenna port
Battery Capacity – 4600mAh
Battery Type – 3.7V Li-Ion rechargeable
Battery life (default operating conditions) – 48 hours
CONNECTORS
VHF antenna – SO-239
GNSS – TNC
Power – 2 way circular multipole
NMEA 0183/silent mode – 12 way circular multipole
NMEA 2000 – 5 way Micro-C connector
USB – USB Micro-B
DATA INTERFACES
NMEA 0183 – 2 x bi-directional ports
NMEA 2000 – NMEA 2000 Ed 3.101, LEN=1
USB – PC virtual com port for NMEA 0183 data
Wi-Fi – IEEE 802.11 (a/b/g), client and access point mode supported (2 connections in access point mode)
Bluetooth – BT Classic 4.0, 7 concurrent connections
STANDARDS COMPLIANCE
AIS standards – IEC 62287-2 Ed. 2. ITU-R M.1371.5
Product safety standards – EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008
Environmental standards – IEC 60945 Ed. 4
Serial data interface standards – IEC 61162-1 Ed 5.0. IEC 61162-2 Ed 1.0
NMEA 2000 – NMEA 2000 Ed 3.101
GNSS performance standards – IEC 61108-1 Ed 2.0. IEC 61108-02 Ed 1.0
GNSS
Systems supported – GPS, GLONASS, BeiDou, Galileo
(two of any combination, three including GPS, Galileo)
Channels – 72
Internal/external antenna – External only
Time to first fix from cold start – 26s
VHF TRANSCEIVER
VDL access scheme – SOTDMA
Operating frequency – 156.025MHz – 162.025MHz
Channel bandwidth – 25kHz
Receivers/transmitters – 2 x receivers, 1 x transmitter
AIS receiver sensitivity (20% PER) – -111dBm
AIS transmitter power – 5W (+37dBm)
USER INTERFACE
Buttons – Integrated silent mode
Indicators – Power, transmit timeout, error, silent mode
GNSS antenna
Size – 85 x 70mm
Weight – 470g
Ingress Protection – IPx6 and IPx7
Mounting – 1 inch 14 TPI pole mount required
GNSS systems supported – GPS, GLONASS, Galileo, BeiDou
