| Agency Standards |
Meets SAE J1171 - external ignition protection requirements |
| Continuous Rating |
120 Amperes DC |
| Intermittent Rating |
210 Amperes DC |
| Closed Current Draw |
175 mA @ 12 Volts, 115 mA @ 24 Volts |
| Open Current Draw |
15 mA |
| Opening Delay |
0.34 sec. |
| Relay Contact Position: Combine (30 sec.) |
13.6 Volts DC @ 12 Volts, 27.2 Volts DC @ 24 Volts |
| Relay Contact Position: Combine (2 min.) |
13.0 Volts DC @ 12 Volts, 26.0 Volts DC @ 24 Volts |
| Relay Contact Position: Open Low (30 sec.) |
12.75 Volts DC @ 12 Volts, 25.5 Volts DC @ 24 Volts |
| Relay Contact Position: Open Low (10 sec.) |
12.35 Volts DC @ 12 Volts, 24.7 Volts DC @ 24 Volts |
| Relay Contact Position - Open High |
16.0 Volts DC @ 12 Volt / 30.0 Volts DC @ 24 Volt |
| Terminal Stud Size |
3/8"-16 (accepts M10 ring terminal) |
| Maximum Cable Size |
1/0 AWG |
| Maximum Torque |
140 in-lbs |
| Agency Standards |
ISO 8846 / Meets SAE J1171 external ignition protection requirements / rated IP67 |
| Weight Lb (Kg) |
1.26 (0.57) |
| Width in" (mm) |
3.886 (98.71) |
| Height in" (mm) |
3.502 (88.96) |
